Comments for PKSafety.com Blog http://blog.pksafety.com Fri, 28 Oct 2011 16:37:51 +0000 hourly 1 http://wordpress.org/?v=3.2.1 Comment on Comparing Gas Monitors by James Moore http://blog.pksafety.com/comparing-gas-monitors/comment-page-1/#comment-2315 James Moore Fri, 28 Oct 2011 16:37:51 +0000 http://blog.pksafety.com/?p=391#comment-2315 Of the two above, I really prefer the Quattro to the MicroClip. While the MicroClip is cheaper and a bit easier to wear, the Quattro user interface is much better in my opinion. In addition to that, the Quattro sensors are much more stable than the MicroClip in my experience. The confidence light on the Quattro also helps if you have a daily bump test program in place, because a foreman can see from afar that the monitor is bumped and doesn't need to halt your work and inspect the monitor. Keep safe, James Moore Of the two above, I really prefer the Quattro to the MicroClip. While the MicroClip is cheaper and a bit easier to wear, the Quattro user interface is much better in my opinion. In addition to that, the Quattro sensors are much more stable than the MicroClip in my experience. The confidence light on the Quattro also helps if you have a daily bump test program in place, because a foreman can see from afar that the monitor is bumped and doesn’t need to halt your work and inspect the monitor.

Keep safe,

James Moore

]]> Comment on Airline Respirators by PKSafety.com Blog » Urethane Paint http://blog.pksafety.com/airline-respirators/comment-page-1/#comment-1960 PKSafety.com Blog » Urethane Paint Fri, 14 Oct 2011 22:04:09 +0000 http://blog.pksafety.net/?p=280#comment-1960 [...] environment. For more information about airline respirators, read our archived blog post about them here, or check out their page on our website [...] [...] environment. For more information about airline respirators, read our archived blog post about them here, or check out their page on our website [...]

]]> Comment on Filters and Lead Fumes by TERRY SMITH http://blog.pksafety.com/filters-and-lead-fumes/comment-page-1/#comment-414 TERRY SMITH Sun, 15 May 2011 15:24:17 +0000 http://blog.pksafety.net/?p=171#comment-414 I propose burning off very old paint that I suspect must be lead based. What type of mask must I used to protect myself.? I propose burning off very old paint that I suspect must be lead based. What type of mask must I used to protect myself.?

]]> Comment on Fall Protection and HVAC Maintenance by Daniel Doherty http://blog.pksafety.com/fall-protection-and-hvac-maintenance/comment-page-1/#comment-142 Daniel Doherty Wed, 05 May 2010 09:48:06 +0000 http://pksafety.com/blog/?p=98#comment-142 Great advice. I think you should never take risks regardless of how small the job. A broken neck is pretty serious - the guy could be dead. Prepare correctly and there is nothing to worry about. I know it's sometimes easy to say it won't take me 5 minutes but a lot can happen in 5 minutes. thanks for this. Great advice.
I think you should never take risks regardless of how small the job. A broken neck is pretty serious – the guy could be dead. Prepare correctly and there is nothing to worry about. I know it’s sometimes easy to say it won’t take me 5 minutes but a lot can happen in 5 minutes.
thanks for this.

]]> Comment on E6000 Glue Respirator Question by Sunny California http://blog.pksafety.com/e6000-glue-respirator-question/comment-page-1/#comment-70 Sunny California Tue, 08 Sep 2009 21:27:10 +0000 http://pksafety.com/blog/?p=60#comment-70 I work on skating costumes too. I recommend using GemTac glue instead of E6000. Using this toxic glue for hours on children's costumes with children in my house is not an option for me. Keep skating and stay healthy! I work on skating costumes too. I recommend using GemTac glue instead of E6000. Using this toxic glue for hours on children’s costumes with children in my house is not an option for me. Keep skating and stay healthy!

]]>